Full Size Printed Plan MOTOR YACHT L 21” Engine Electric Suitable for R/C Great beginners Project

Full Size Printed Plans

Not a KIT or MODEL no Material

Great beginners Project

REPRODUCED VINTAGE PLAN FROM 1960

PATRICIA    

MOTOR YACHT

Full Size Printed Plan on a Sheet 28" x 20"

Two Pages of building notes

Length 21”

Engine Electric

Suitable for Radio Control (No installation Shown)

BY E. T. BAKER

THE Patricia is a flat bottomed vessel, very light and very fast when powered by a KAKO No. 2 or similar motor. The big point with this boat is the fact that she will carry a good sized load of batteries or radio gear.

To commence construction lay the crutch first; this is made from 1/4 in. square balsa as can be seen from the plan. Chamfer Cl as shown, lay the cross pieces, then cement the long strips to them and pin down to dry. While the crutch is drying fit the bulkheads, making sure that B1 and the transom are chamfered and set at the correct angle. When the bulkheads have been pinned to the crutch, cement the under crutch of On. square balsa to the bulkheads; hold in place with pins until set.

Thank you for your interest