Free Shipping U.S.A and Canada | Small charge for international Does not include Digital Files on Cd

Digital full size plans on Cd 21" MOTOR YACHT Great beginners Project Suitable for Radio Control (
Digital full size plans on Cd 21" MOTOR YACHT Great beginners Project Suitable for Radio Control (
Digital full size plans on Cd 21" MOTOR YACHT Great beginners Project Suitable for Radio Control (
Digital full size plans on Cd 21" MOTOR YACHT Great beginners Project Suitable for Radio Control (

Digital full size plans on Cd 21" MOTOR YACHT Great beginners Project Suitable for Radio Control (

Regular price $5.99
Unit price  per 

Description

Digital full size plans on Cd

Not a printed plan and no material supplied

Great beginners Project

REPRODUCED VINTAGE PLAN FROM 1960

PATRICIA    

MOTOR YACHT

Digital Full Size Plan prints on a Sheet 28" x 20"

Digital Two Pages of building notes

Digital Files are TIFF, JPEG and PDF

Printing………..MAY BE DONE AT A COPY HOUSE

 …………………………ALSO INCLUDED INSTRUCTIONS FOR PRINTING AT HOME

Length 21”

Engine Electric

Suitable for Radio Control (No installation Shown)

BY E. T. BAKER

THE Patricia is a flat bottomed vessel, very light and very fast when powered by a KAKO No. 2 or similar motor. The big point with this boat is the fact that she will carry a good sized load of batteries or radio gear.

To commence construction lay the crutch first; this is made from 1/4 in. square balsa as can be seen from the plan. Chamfer Cl as shown, lay the cross pieces, then cement the long strips to them and pin down to dry. While the crutch is drying fit the bulkheads, making sure that B1 and the transom are chamfered and set at the correct angle. When the bulkheads have been pinned to the crutch, cement the under crutch of On. square balsa to the bulkheads; hold in place with pins until set.

Thank you for your interest

 

Reviews