Free Shipping U.S.A and Canada | Small charge for international Does not include Digital Files on Cd

Digital full size plans on Cd Freelance 28" launch SEASPRITE Suitable for Radio Control
Digital full size plans on Cd Freelance 28" launch SEASPRITE Suitable for Radio Control
Digital full size plans on Cd Freelance 28" launch SEASPRITE Suitable for Radio Control

Digital full size plans on Cd Freelance 28" launch SEASPRITE Suitable for Radio Control

Regular price $5.99
Unit price  per 

Description

Digital full size plans on Cd

Not a printed plan and no material supplied

SEASPRITE

Digital Full Size Plan on a sheet 38” x 24”

Digital Two page article with building notes and photos

Digital Two page article with building notes and photos

Digital Files are TIFF, JPEG and PDF

Printing………..MAY BE DONE AT A COPY HOUSE

 …………………………ALSO INCLUDED INSTRUCTIONS FOR PRINTING AT HOME

Freelance

Length 28”

Beam 9”

Power Gas .09 (1.5cc) or electric

Suitable for Radio Control (note: no R/C installation shown)

BY P. MAYS

AN old issue of Model Maker featuring the Ariston on the cover, triggered off the design of this model, which is 28 in length. The original used a Taycol Meteor (mounted on its side) but if two single seats were fitted forward it would be quite simple to mount an ic engine of, say, 1½ cc, between them.

Construction starts in the conventional way by tracing and cutting the keel from 1/8 in ply, allowing for the prop tube. Cut the 6 bulkheads and slot them as shown, and add 1/8 in ply doublers to the keel fore and aft of B3, for the prop and rudder tubes. Assemble the bulkheads to the keel and add chines and inwales; when dry glass-paper all edges to provide a fair seating for the 1/16 in ply skins, especially the V of the keel in the region of the doublers. The skins on the original were attached with Britfix cement, with a few tiny brass pins where necessary.

Thank you for looking

Reviews