Free Shipping U.S.A and Canada | Small charge for international Does not include Digital Files on Cd

Digital full size plans on Cd semi-scale 1:72 Steam Yacht SUNDA Suitable for radio control
Digital full size plans on Cd semi-scale 1:72 Steam Yacht SUNDA Suitable for radio control
Digital full size plans on Cd semi-scale 1:72 Steam Yacht SUNDA Suitable for radio control
Digital full size plans on Cd semi-scale 1:72 Steam Yacht SUNDA Suitable for radio control

Digital full size plans on Cd semi-scale 1:72 Steam Yacht SUNDA Suitable for radio control

Regular price $5.99
Unit price  per 

Description

Digital full size plans on Cd

Not a printed plan and no material supplied

Steam Yacht SUNDA

Digital Full Size Plan on a sheet 32” x 15”

Digital Two page article with building notes and photos

Digital Two page article with building notes and photos

Printing………..MAY BE DONE AT A COPY HOUSE

 …………………………ALSO INCLUDED INSTRUCTIONS FOR PRINTING AT HOME

Scale is around 1 in. = 6 ft., or I / 72

Length 31 ½”

Beam 31/2”

Power electric or Sail

Suitable for radio control

     THIS is a model for small size straight running events, sailing for fun, or, if you fancy it, lightweight single channel R/C installation. It started off as a model for the run for run 'up to 4HP2 cell' class which we shall be doing at the M.E. Exhibition, but calculations show that with four HP2s a model very much bigger than we have space for could be built about half as big again as this one, with, say, a Monoperm Super and series cells. This one will take four cells at a squeeze, but even on two and any 3?6v motor with a case diameter of an inch or more, the speed is adequate for most purposes. Construction is simple and quite quick, so we hope to see a few turn up at Seymour Hall between January 4th and 15th.

    The design is representative of a small early steam yacht, some of which were quite plainly fitted out, but it is capable of embellishment to the builder's taste. For a majority of modelers the fact that many commercial fittings are suitable (boats, davits, bollards, etc.), is an advantage. The scale is around 1 in.= 6 ft., or I / 72, or even 1 / 76, which is 4 mm scale, i.e. the vessel would fit in a harbour scene on a period 00 gauge railway layout.

    Basic needs are one sheet of I/2” x 4” and two sheets of 1/8” x 4” balsa, and this need not be very hard; in fact, the I in. is better soft. Trace out the hull bottom (note that it is full width ahead of BI and aft of B3, but has a 1, in. reduction between these points) and the rest of the sheet can be used for the bow and stern laminations. Cement the laminations into four stacks

Thank You for Looking

We combing Shipping

Reviews