Free Shipping U.S.A and Canada | Small charge for international Does not include Digital Files on Cd

Digital full size plans on Cd Vintage 1980 Control Line “AQUILA” Stunt  Wingspan 56"  Engine .40
Digital full size plans on Cd Vintage 1980 Control Line “AQUILA” Stunt  Wingspan 56"  Engine .40
Digital full size plans on Cd Vintage 1980 Control Line “AQUILA” Stunt  Wingspan 56"  Engine .40
Digital full size plans on Cd Vintage 1980 Control Line “AQUILA” Stunt  Wingspan 56"  Engine .40
Digital full size plans on Cd Vintage 1980 Control Line “AQUILA” Stunt  Wingspan 56"  Engine .40
Digital full size plans on Cd Vintage 1980 Control Line “AQUILA” Stunt  Wingspan 56"  Engine .40
Digital full size plans on Cd Vintage 1980 Control Line “AQUILA” Stunt  Wingspan 56"  Engine .40
Digital full size plans on Cd Vintage 1980 Control Line “AQUILA” Stunt  Wingspan 56"  Engine .40

Digital full size plans on Cd Vintage 1980 Control Line “AQUILA” Stunt Wingspan 56" Engine .40

Regular price $5.99
Unit price  per 

Description

Digital full size plans on Cd

Not a printed plan and no material supplied

Vintage 1980

“AQUILA”

Digital Full Size Plan prints on a Sheet 48" x 33"

Digital Seven page article with building notes and photos

Digital Files are TIFF, JPEG and PDF

Printing………..MAY BE DONE AT A COPY HOUSE

 …………………………ALSO INCLUDED INSTRUCTIONS FOR PRINTING AT HOME

Control Line Stunt

Wingspan 56"

Engine .40

by BOB HUNT AND ROLAND MCDONALD

This I-beam construction stunter helped author Bob McDonald take Rookie of the Year honors at the 1979 Nationals.

Aquila is a farily conventional design, but it does have two features which merit special attention.

The first of these features of course, is the I-beam type wing, which takes some explanation and necessitates a couple of special building techniques. The second feature is my "trick" control system.                           

Control system                           

First, let's look at the adjustable control system, how it is built and how it works. The elevators are driven by a pushrod which is connected directly to the bellcrank, and the flaps are connected to a sliding adjustable block held on the main pushrod with setscrews. You will note that each flap has a separate horn and pivoting "ear" from each of which runs a short pushrod which passes through holes in the adjusting block and is secured with set screws.Since right now I can't claim the distinction of being one of the top "name" fliers, perhaps I should start this by introducing myself, telling you a bit about what I have accomplished in model flying, and how I came to develop Aquila.

Thank you for your interest

Reviews