Free Shipping U.S.A and Canada | Small charge for international * Emailed Digital files free * Digital files on USB card $10.00 includeds card and shipping

Digital Full-Size Plans Scale 1/32 screw tug CRUISER suitable for radio control
Digital Full-Size Plans Scale 1/32 screw tug CRUISER suitable for radio control
Digital Full-Size Plans Scale 1/32 screw tug CRUISER suitable for radio control
Digital Full-Size Plans Scale 1/32 screw tug CRUISER suitable for radio control
Digital Full-Size Plans Scale 1/32 screw tug CRUISER suitable for radio control
Digital Full-Size Plans Scale 1/32 screw tug CRUISER suitable for radio control
Digital Full-Size Plans Scale 1/32 screw tug CRUISER suitable for radio control
Digital Full-Size Plans Scale 1/32 screw tug CRUISER suitable for radio control
Digital Full-Size Plans Scale 1/32 screw tug CRUISER suitable for radio control
Digital Full-Size Plans Scale 1/32 screw tug CRUISER suitable for radio control

Digital Full-Size Plans Scale 1/32 screw tug CRUISER suitable for radio control

Regular price $4.99
Unit price  per 

Description

Digital Full-Size Plans will be Emailed only as a PDF.

Or

Buy as a USB stick that can hold up to eight plans for multiple purchases.

USB, in PDF, JPEG, and TIFF formats are shipped by first class airmail.

You may have the plans printed at a print shop or tile printed on your home printer

Vintage plans from 1971

CRUISER

Digital Full size plan prints ON TWO SHEETS 43” x 24”

Digital Seven Page article with building notes and photos

Digital emailed files are PDF,

Purchased USB Card includes TIFF and JPEG

Also, USB Card includes several articles on building model boats files are PDF and JPEG

Printing………..IT MAY BE DONE AT A COPY HOUSE

SCALE 3/8 in.to 1 ft. (1:32)

LENGTH 43”

BEAM 9 1/2”

Electric

RADIO CONTROL

Introducing 'Cruiser' of 1904 and a novel method of construction

BY P. N. THOMAS

One day some work was carried out in the office where I work and I saw the joiners using what I thought were expanded polystyrene foam blocks for partitioning. A friend whose hobby was model aircraft had told me about polystyrene wings and I thought I would try some of this 'Purlboard' for a hull. The Purlboard is 2in. thick including the card­board outer layers and, as I found later, is actually polyurethane foam - this is important, as it is not affected by glass fibre resin and needs no protection against it. It carves easily with a sharp knife, but you must keep sharpening the knife from time to time as it blunts quite quickly. It also sandpapers very easily so little pressure must be used.

  The Cruiser was typical of the screw tug of her day, a narrow hull with little sheer, a 'hollow' entry to give her speed, and bulwarks with very little tumblehome. The funnel was long and thin with a rake that is a bit startling by today's standards. The rake was decreased later — because, it is said, in a following wind the smoke would blow back down the funnel. One or two features were unusual. Tugs generally had 'deadening' above the living quarters, either wood planking or linoleum, and this is absent.

Thank you for looking

Reviews