Full Size Printed Plan 1957 Control line Profile W/S 15 “ Engine .049 CRACKERJACK peppiest little A half‑A

Full Size Printed Plan & Building Notes

No materials. Plan only

Make this fast control‑line model from plans

Vintage 1957

CRACKERJACK  

Full Size Printed Plan on two 17" x 11" sheets

Six page article of notes and photos

Control line Profile

Wingspan 15 “

Engine .049

By Paul Del Gatto

  THIS is just about the peppiest little A half‑A control‑line profile model we've ever had the pleasure of doing. It wings around at high speed on 30‑ft. lines and is capable of performing maneuvers usually associated with profile models twice its size and power. You can build it from scratch by following the plans.

   If you decide to follow the plans, lay out the parts on‑sheet balsa, cut them out and sand the surfaces smooth. The trailing edges of the wing are cut separately and they.are cemented in place after the main section of the wing has been cemented in the fuselage profile. However, before installing the wing, bend the landing gear strut from 1/16 in diameter wire and cement it in place. Reinforce the strut by binding it with thread passed through the fuselage and cementing gussets at the rear.

30 DAY NO QUESTIONS ASKED MONEY BACK GUARANTEE

THANK YOU FOR LOOKING