Full size Printed Plans Scale 1:10 Control line GEE-BEE stable and smooth flying model;

Full size Printed Plans & Article

Not a KIT or MODEL No Material

Reproduced vintage plan from 1951

GEE-BEE

Full size printed plan on a 32” x 24” sheet

Six page article with building notes, material list and photos

Scale 1:10

Control line

Wingspan 30 ¾”

Engine .19

 By Les Mc Brayer

   It your Gee Bee is to be stable and smooth flying model; it is essential that the balance point is as marked on the plans -- 3/8" hack from the leading edge. Add weights to the nose or tall it required. Be sure all surfaces are at zero degrees incidence. Make certain that the rudder is off-set 1/4" to the outside of the circle. Be sure that the wheels turn in the pants freely and that the model rolls straight on the ground.

   One of the most famous of all racing airplanes, the Gee Bee with its short, stubby design makes an unusually attractive control line model. Although a little harder to construct than some models, the builder will be rewarded with a smooth, easy flying model which can be used for Scale or Team Racing contests. The Gee Bee will attract great attention wherever it is flown.

Thank you for looking