Full Size printed PLANS Vintage from 1953 L 20” B 8 5/8” Engine .049 to .099 suitable for radio control

Full Size printed plans and Article

Not a kit or Model no material included

Vintage reproduced from 1953

Spook

International Class racing boats provide colorful model boating subjects such as this racey hull

Full size printed plan on a sheet 24” x 17”

Three page article with building notes

Length 20”

Beam 8 5/8”

Engine .049 to .099

May be converted to Radio control and or Electric motor

Note: No radio installation shown

by Hank Dillenkofer

CONSTRUCTION:

    Begin making your model by cutting out the two side pieces. Use the grids as a guide to laying out the proper curves on the 1" x 1” strip stock used for these parts. Locate bulkheads A and G and cement them in place along with the 1" sheet balsa bow block. You may at this time also add the other bulkheads and the 1/8" x 1/4" cockpit side strips.

   Installation of the underwater drive is simple. A K&O marine unit proved to be ideal. Note that the rudder is located on the transom and supplies simple and easy adjustment. Try to keep the prop deep to guard against cavitation. Running properly, this model sits up on three points—the sponson tips and the prop. Larger engines are best for tether running.

Thank you for looking